SidingCostEstimate

Siding contractors in Tucson, AZ

Local siding cost estimates and tips for hiring a siding contractor in Tucson.

How to Get Estimates
Home › Siding Contractors › Arizona › Siding contractors in Tucson, AZ

By SidingCostEstimate Editorial Team · Updated

Siding prices in Tucson tend to run below the national average (our estimated local factor: 0.95×). The local climate brings intense sun and heat, so contractors often recommend stucco, fiber cement and metal.

Vinyl siding in Tucson is estimated at $4.27 – $7.79 per sq ft installed; for 2,000 sq ft of wall area, roughly $8,600 – $15,600.

Siding cost in Tucson by material

MaterialInstalled cost / sq ft
Vinyl$4.27 – $7.79
Insulated vinyl$5.70 – $10.45
Engineered wood (e.g. LP SmartSide)$4.75 – $9.50
Fiber cement (e.g. James Hardie)$5.70 – $12.35
Wood (cedar, clapboard)$5.70 – $13.30
Metal / aluminum / steel$4.75 – $11.40
Stucco$6.65 – $11.40
Stone / stone veneer$14.25 – $47.50
Old siding removal (add-on)$0.66 – $1.90

Whole-house cost in Tucson

Home sizeVinylEngineered woodFiber cement
1,500 sq ft wall area (small ranch)$6,400 – $11,700$7,100 – $14,200$8,600 – $18,500
2,000 sq ft (typical two-story)$8,600 – $15,600$9,500 – $19,000$11,400 – $24,700
2,500 sq ft (larger home)$10,700 – $19,500$11,900 – $23,800$14,200 – $30,900

Third-party cost benchmarks for Tucson

These published figures cover different project scopes and are not directly comparable with the estimates above. Read the full breakdown.

Hiring a siding contractor in Tucson

Read contractor red flags · Best siding for Tucson's climate → · Material guides: James Hardie, LP SmartSide, wood, stucco, repair

How to get and compare siding estimates →

Nearby

PhoenixAll Arizona cities

Frequently asked questions

How much does siding cost in Tucson?

Our estimate for vinyl is $4.27–$7.79 per sq ft installed, or about $8,600–$15,600 for 2,000 sq ft of wall area.

What is the best siding for Tucson?

With intense sun and heat, stucco, fiber cement and metal are popular choices. Stucco and fiber cement shrug off UV and heat; light colors reduce fading and heat gain.

About these figures: per-square-foot ranges, project totals, climate recommendations and city/state adjustments in the tables on this page are SidingCostEstimate editorial estimates, scaled from typical national ranges with an estimated local cost factor. They are not survey data or quotes. For dated third-party benchmarks from Angi, HomeGuide, This Old House and the Cost vs. Value Report, see our methodology and cost to side a house. Always compare written quotes from licensed local contractors.