SidingCostEstimate

Siding contractors in Seattle, WA

Local siding cost estimates and tips for hiring a siding contractor in Seattle.

How to Get Estimates
Home › Siding Contractors › Washington › Siding contractors in Seattle, WA

By SidingCostEstimate Editorial Team · Updated

Siding prices in Seattle tend to run above the national average (our estimated local factor: 1.25×). The local climate brings rain, moisture and mild temperatures, so contractors often recommend fiber cement and engineered wood with a rainscreen.

Vinyl siding in Seattle is estimated at $5.62 – $10.25 per sq ft installed; for 2,000 sq ft of wall area, roughly $11,200 – $20,500.

Siding cost in Seattle by material

MaterialInstalled cost / sq ft
Vinyl$5.62 – $10.25
Insulated vinyl$7.50 – $13.75
Engineered wood (e.g. LP SmartSide)$6.25 – $12.50
Fiber cement (e.g. James Hardie)$7.50 – $16.25
Wood (cedar, clapboard)$7.50 – $17.50
Metal / aluminum / steel$6.25 – $15
Stucco$8.75 – $15
Stone / stone veneer$18.75 – $62.50
Old siding removal (add-on)$0.88 – $2.50

Whole-house cost in Seattle

Home sizeVinylEngineered woodFiber cement
1,500 sq ft wall area (small ranch)$8,400 – $15,400$9,400 – $18,800$11,200 – $24,400
2,000 sq ft (typical two-story)$11,200 – $20,500$12,500 – $25,000$15,000 – $32,500
2,500 sq ft (larger home)$14,100 – $25,600$15,600 – $31,200$18,800 – $40,600

Third-party cost benchmarks for Seattle

These published figures cover different project scopes and are not directly comparable with the estimates above. Read the full breakdown.

Hiring a siding contractor in Seattle

Read contractor red flags · Best siding for Seattle's climate → · Material guides: James Hardie, LP SmartSide, wood, stucco, repair

How to get and compare siding estimates →

Nearby

SpokaneAll Washington cities

Frequently asked questions

How much does siding cost in Seattle?

Our estimate for vinyl is $5.62–$10.25 per sq ft installed, or about $11,200–$20,500 for 2,000 sq ft of wall area.

What is the best siding for Seattle?

With rain, moisture and mild temperatures, fiber cement and engineered wood with a rainscreen are popular choices. Constant moisture makes rot resistance and proper drainage (rainscreen gap) the priority.

About these figures: per-square-foot ranges, project totals, climate recommendations and city/state adjustments in the tables on this page are SidingCostEstimate editorial estimates, scaled from typical national ranges with an estimated local cost factor. They are not survey data or quotes. For dated third-party benchmarks from Angi, HomeGuide, This Old House and the Cost vs. Value Report, see our methodology and cost to side a house. Always compare written quotes from licensed local contractors.